The B126-2A0 is a receiver unit that is used with the B126-002 and B126-004 transmitter units. It extends a 1080p (60Hz) signal to two monitors up to 150 ft. away using Cat5e/6 cable, and then splitting the signal out to 2 x HDMI outputs. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite’s N202-Series) It features a built-in Equalization control for adjustment of the video image. Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround sound audio (7.1 channel surround sound signal will be Multi-Channel or PCM).Installation is simple. Connect the transmitter unit to an HDMI source using a Tripp Lite P568-Series HDMI cable (not included). Connect the receiver unit to a display using a Tripp Lite P568-Series HDMI cable (not included). Finally, connect the receiver to the RJ45 port on the transmitter using a single Cat5e/6 cable.
Make sure this fits by entering your model number.
2-PORT ACTIVE EXTENDER/SPLITTER: Works with Tripp Lite’s B126-Series transmitters to receive an HDMI signal via one Cat5e/6 cable and split it to 2 projectors, monitors or televisions. Ideal for digital signs, schools and trade show presentations.
EXTENDS HDMI OVER CAT5/CAT6: The B126-2A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet.
REMOTE RECEIVER FOR VIDEO & AUDIO: Supports high-definition video resolutions up to 1080p (60 Hz). Built-in equalization control lets you adjust monitor image. Supports stereo and 7.1-channel surround sound audio.
TAA-COMPLIANT & EASY TO USE: Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Works with all operating systems and HDMI video sources. Plug and play—no software or drivers to install.
