The B160-201-HSI 2-port HDMI audio/video with RS-232 serial and IR control over IP extender kit extends and distributes HDMI audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch located up to 328 feet (100 M) from the transmitter. With an additional 328 feet between the switch and the receiver, the maximum distance from source to display is 656 feet (200 M). you can also directly connect the transmitter and receiver up to 328 feet apart with Cat5/Cat6 cabling. The B160-201-HSI is designed for managed network switches with gimp, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation. The B160-201-HSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. In a point-to-multipoint switch installation, you can send the HDMI video source to any analog or digital display, including VGA and DisplayPort. Dual HDMI ports on the receiver allow the connection of two displays. It extends IR control signals that control a source, such as a blu-ray player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 bps. B160-series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance. Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to Number of ports remaining on Unmanaged switch. 1-Year limited warranty
Make sure this fits by entering your model number.
Converts source video to imp-based signal transmitted to and Distributed through network switch
Transmitter and receiver each extend signal up to 328 ft. (100 M) from switch for maximum distance of 656 ft. (200 M)
Supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz
Connect up to 64 transmitters and 255 receivers in single managed switch installation
1-year limited warranty